10,000 Litre (2,100 gallon) Steel Bunded Oil Tank

10000L steel oil tank

10000 litre (2000 gallon) bunded steel oil tank, suitable for installation at commercial, agricultural or industrial premises for the purposes of storing heating oil, diesel, and a variety of solvents, chemicals or liquids.

These tanks provide a cost effective solution for the requirement of a watertight bund area around the tank. The 1000L steel oil tank features an all-steel bunded construction, with an inner tank, which holds the fuel, and an outer, watertight bund, which is capable of holding 110% of the inner tank’s capacity in the event of a tank failure.

10000L steel oil tank Features:

• Actual Capacity: 10000 litres 
• Integral steel bund (2mm)
• Vent: 2″ inc Cap
• Fill point: 2″ inc. Non-Return Valve and Cap
• Bund Drain and Test Point: 1.5″ BSP Female
• Clock Bund Contents Gauge: 1.5″ BSP Female
• Clock Tank Contents Gauge: 1.5″ BSP Female
• Outlet: 1″ inc. Isolation Valve (Top or Bottom Outlet Available)
• Base Plinths

Please note: the exact shape, colour and fittings on your tank may alter slightly from the image shown.

These tanks are designed for above ground installations and should be installed by a suitably competent and qualified tank installer, in line with appropriate UK regulations and the manufacturer’s instructions.

Warranty:

10 years (Welding and Tank Structure)

Relevant Regulations:

This 10000 litre bunded steel fuel tank complies with the following UK regulations:

BS799 Part 5

Oil Pollution Prevention Guidelines (England & Wales) (2002) PPG2 & PPG26

Installation:

Suitable for domestic and commercial use, in above ground installations.

Oil tanks should always be installed by a competent and qualified OFTEC technician.

Installation instructions are provided with the tank and should be adhered to accurately in order to validate the tank’s warranty.

Delivery:

Shipping Costs: POA – FREE collection available please call 01953 665940 for details.

Delivery terms and conditions apply. It is the customer’s responsibility to ensure that adequate access and turning space is provided for a flatbed vehicle and that appropriate offloading facilities and equipment is provided. Please contact us on 01953 665940 for Hiab and other special delivery requests and we will be happy to assist.