2000L Dust Suppression Bowser
This 2000L dust suppression bowser is a site tow specification and consists of a plastic tank on a galvanised or painted chassis. These sturdy bowsers are manufactured from 3mm steel plate, and are firmly attached to the chassis. The tank is horizontal, with flat ends and lid for filing the bowser at the front on top. Inside the tank are internal anti-surge baffles to prevent the water surging in transport. Blue painted tanks are WRAS approved and can carry water suitable for human consumption. There are also other colours available on request if you should need your fleet of bowsers colour coded. All bowsers are fitted with a sight gauge to enable easy check of water level.
This dust suppression bowser is fitted with a 1″ Honda petrol pump and has two rear plastic spray nozzles. The nozzles are fitted on a camlock basis and can be altered to spray in any direction, going left or right, up or down. Therefore, these bowsers are ideal for damping down if you have a dust problem on a site.
Features of the 2000L dust suppression bowser:
- 2000 litre tank
- manufactured from 3mm steel plate
- baffles
- 2″ BSP filter
- 1 3/4″ BSP air-vent
- sight gauge
- lid for filling the bowser
- 1″ tap at rear
- towing eye
- galvanised chassis
- jockey wheel
- single wheeled chassis
- Camlock fitting for spraying
This water bowser is ideal for carrying water and spraying around the site. Most useful on the bigger site where water supply has not been installed. Please do not hesitate to ask about our range of sizes in water bowsers.
You may also require:
- Extra Tank
- Upgraded nozzle to galvanised
- Booominator kit alone
Please do not hesitate to contact us on 01953 65940 if you require assistance with your purchase of a bowser.