2200 litre Steel Waste Oil Tank

2200 litre capacity bunded steel waste oil tank

Length 2050mm

Width 1220mm

Height 1230mm

Weight 339kg



This 2200 litre steel waste oil tank is suitable for both pumped and hand fill applications. The outer tank of the twin walled construction acts as a liquid tight bund with capacity for 110% of the liquid being stored. The inner storage tank is internally braced for additional strength. Fitted with full width base plinths eliminating any ground contact with bund base. Tanks can easily be filled by hand via the large, lockable hinged hatch which has tapered sides ensuring all waste oil drains into tank. The mesh base will filter out debris, and suction tubing is supplied to enable easy removal of waste oil. This range of waste oil tanks is fully compliant with BS799 part 5 and Oil Pollution Prevention Guidelines (England & Wales) 2002 PPG2 and PPG26.

A range of other sizes are available in a choice of colours.

Specification for the 2200 litre steel waste oil tank:

  • 2223 litre capacity
  • 488 gallon
  • Suction tube: 2”BSP male
  • Pump outlet / inlet: 2”BSP female
  • Bund drain & test point: 1½”BSP female
  • Bund contents gauge: 1½”BSP female.
  • Tank contents gauge: 1½”BSP female
  • Four lifting points on top (Lift empty only)
  • Sieved hatch: 18” tapered sides, hinged & lockable

NOTE: Image is for illustration purposes only and may not be the exact design.

Additional information

Weight 368 kg
Dimensions 2050 × 1220 × 1230 cm

Blue, Green, Red, Yellow

    Your Cart
    Your cart is emptyReturn to Shop